ShortsWise

Buyer guides

Building a Beach Shorts Size Specification

By

A beach shorts size specification describes the finished garment, not just its size label. A reference pair in a known size and clearly drawn measuring points help the factory reproduce the intended proportions.

Base size and measurement unit

A size chart needs a base size, an intended wearer and one consistent measurement unit. Finished-garment measurements should remain separate from body measurements: the wearer’s waist circumference and the relaxed width of a flat waistband are different measurements.

Measuring points

A front or back drawing locates each measuring point by the same name used in the size chart. A seat line at a defined distance below the waistband makes that measurement repeatable.

Measurement What to define
Waist The relaxed half-waist is the straight width across a flat waistband, with the elastic unstretched. A stretched-waist value also needs a defined extension method so measurements remain comparable.
Seat / hip A marked line below the waistband locates the seat measurement. The straight distance across that line is a flat half-width.
Front and back rise Front and back rise run from the crotch seam intersection up the center front or center back. The end point can be the top of the waistband or its joining seam; the chart identifies which is used.
Inseam and outseam The inseam runs from the crotch seam intersection down the inside leg to the finished hem. The outseam follows the side from a defined point on the waistband to the hem.
Leg opening A flat leg-opening measurement is the straight distance across one leg’s finished hem. Twice that width is the corresponding circumference; the chart identifies which form is used.

Fit in a finished sample

When a sample feels tight while sitting, the seat width and rise are useful places to compare with the chart. With a mesh brief, the lining may restrict movement even when the outer shorts have enough room. Identifying the source of the restriction avoids changing the wrong part of the garment.

Grading the size run

Grading defines the increase or decrease for each measurement in adjacent sizes. The same increment need not suit the waist, rise and inseam. A final size chart records those increments, the measuring method and the allowed variation as the reference for bulk cutting.